How to calculate stair angle
A stair's angle (its pitch) comes from one step: the riser is how high each step rises and the tread or going is how far forward it goes. The angle is the arctangent of the two:
Stair angle = arctan(riser ÷ tread)
Example: 7 in riser, 11 in tread → arctan(7 ÷ 11) = arctan(0.636) = 32.5°
Working from the whole staircase instead:
- Measure the total rise from finished floor to finished floor, for example 108 in (9 ft).
- Pick a riser height near 7 to 7½ in (18 to 19 cm) and divide: 108 ÷ 7.5 = 14.4, so round up to 15 risers of 108 ÷ 15 = 7.2 in.
- Count the treads: one fewer than risers, so 14 treads.
- Divide the total run by the treads: 140 in ÷ 14 = 10 in per tread.
- Find the angle: arctan(7.2 ÷ 10) = 35.8°.
Stair angles at a glance
| Angle | What it is | Where you find it |
|---|---|---|
| Under 20° | Ramp | Wheelchair ramps are much flatter: 1:12, about 4.8°. |
| 20° to 30° | Gentle stair | Public buildings, outdoor steps, grand staircases. |
| 30° to 37° | Comfortable stair | Most homes. 35° is a classic target. |
| 37° to 42° | Steep stair | Allowed for private stairs in some places, like the UK (max 42°). |
| 42° to 50° | Very steep | Space-saving and alternating-tread stairs, basements, lofts. |
| 50° to 75° | Ship's ladder | Boats, mezzanines, industrial access. |
| 75° to 90° | Ladder | Fixed and extension ladders. A leaning ladder is safest near 75°. |
Common riser and tread combinations
| Riser | Tread | Angle | 2R + T |
|---|---|---|---|
| 6 in | 12 in | 26.6° | 24 in |
| 6.5 in | 11 in | 30.6° | 24 in |
| 7 in | 11 in | 32.5° | 25 in |
| 7 in | 10.5 in | 33.7° | 24.5 in |
| 7.25 in | 10.5 in | 34.6° | 25 in |
| 7.5 in | 10 in | 36.9° | 25 in |
| 7.75 in | 10 in | 37.8° | 25.5 in |
Building code basics
- US (IRC, homes): risers 7¾ in maximum, treads 10 in minimum, headroom 6 ft 8 in. Risers in one flight may not vary by more than ⅜ in.
- England and Wales (Part K, private stairs): rise 220 mm maximum, going 220 mm minimum, pitch 42° maximum, and 2R + G between 550 and 700 mm.
- Everywhere: local rules win. Commercial and public stairs have stricter limits. Check with your building department before you cut stringers.
Measuring an existing staircase? Lay your phone on the handrail or stringer and read the angle with the angle finder, or snap a side-on photo and use measure angle from photo. To lay out the stringer angle on paper, the online protractor and printable protractor help too.
Frequently asked questions
What is a good angle for stairs?
Between 30° and 37° feels comfortable for most people, and about 32° to 35° is the sweet spot for homes. Under about 20° you are building a ramp, and above 50° it becomes a ladder.
How do I calculate the angle of a staircase?
Divide the riser height by the tread depth and take the arctangent: angle = arctan(riser ÷ tread). A 7-inch riser with an 11-inch tread gives arctan(7 ÷ 11) = 32.5°. You can also measure an existing stair by laying your phone on the handrail or stringer with the angle finder.
What is the maximum stair angle allowed by code?
In the US, the International Residential Code (IRC) limits risers to 7¾ inches and requires treads of at least 10 inches, which works out to a maximum of about 37.8°. In England and Wales, private stairs may be up to 42° (with a maximum rise of 220 mm and a minimum going of 220 mm). Always check your local code; many places add their own rules.
How many steps do I need?
Divide the total rise (floor to floor) by your target riser height and round up. For a 9-foot (108-inch) rise and a 7½-inch target, 108 ÷ 7.5 = 14.4, so you need 15 risers of 7.2 inches each. A straight stair has one fewer tread than risers, because the top floor is the last step.
What is the 2R + T rule?
Twice the riser plus the tread should be about 24 to 25 inches (61 to 64 cm), which matches a normal walking stride. A 7-inch riser and 11-inch tread gives 2 × 7 + 11 = 25 inches: comfortable. The calculator checks this for you.